Month: June 2017

First Church of Christ, Cabinetmaker

For some time now, I’ve had a silly little fantasy. I’d start my own church: the First Church of Christ, Cabinetmaker. We’d meet on Saturday afternoons and glory in the making of things. From the crotchety handtoolers to the hipster CNC’rs, and everyone in between, all would be welcome. 

The Jesus part would be optional, of course. I am Catholic, after all. The only mandatory worship would be at the sharpening stone.  We’d observe only the greatest commandment: do your best not to be a dickbag, at least not all the time.  And don’t borrow tools without asking. 

Any early converts?

JPG

A Loving Home

A package came in the mail on Saturday.  James over at The Daily Skep was gracious enough to gift to me the box he made for his custom box for a Veritas Large Router Plane.  I am happy to say the box now has a new home in my tool chest.

IMG_20170618_095956-1

Fits very nicely.

For those who haven’t seen it before, it holds the plane itself, the fence and some additional blades, with a sliding lid.  I am particularly fond of the bits of veneer that hold the plane in place in the well.  It feels very Dutch tool chest-like in its own way.

IMG_20170618_095611

I seem to have one more extra blade than James.

Thanks very much, James.  By the way, if you’re not a reader of The Daily Skep, you should be.

JPG

 

Like that Scene in ‘Office Space’

Life has been fairly hectic lately, but I found some time over the weekend to paint the finished Dutch tool chest.  Seeing has how I’ve been working out of a black tool chest (albeit a Craftsman 40″ mechanics chest) for a while, I kept the theme by painting the Dutch tool chest black.  What I didn’t keep, however, was the expansive footprint.  The shop feels so much more open now.   The smaller footprint will allow me to move my workbench further away from the back wall.

IMG_20170604_132704

The area from the trash can to the door used to be completely filled with tool chest.

I am very pleased with the overall result, although I have two minor complaints about my execution of the design of the Dutch tool chest:

  • The fall front really needs to be made from something quarter- or rift-sawn.  I made the mistake of using two flat-sawn boards that have cupped wildly (despite the battens) and expanded as the humidity changed over the last month.  It’s less visible now that it’s painted, but I will eventually throw a temper tantrum and remake the fall front .  The locks will be reusable, and I’ll try and salvage the nails from the battens.
  • I don’t think having two fully open compartments below is correct for my tool set.  I’m not sure I’d have evenly divided it into three, but I need to test a shallow drawer first and see how things work out (more on that later).
IMG_20170604_130308

If I could turn back time, I’d paint the case before attaching the lid.

Figuring out how to efficiently store everything is still a work in progress.  I have plenty of room for hanging things on the walls (e.g., a block plane holster like Mr. Schwarz) and still need to make the under-lid till for my crosscut panel saw.  There seem to be nooks and crannies everywhere to stash tools.  And I should probably remake the inner saw till from a harder wood as well.

IMG_20170604_132716

Quite a bit of real estate on the inside walls.

All of that said, I’m really pleased with how this has worked out.  Even if it ends up being a non-permanent solution, I’m glad for the experience.  This is something I definitely could have (should have?) made for my apartment.  I’d love to make the smaller version as an intellectual exercise, but I have many traveling tool chests kicking around and there is so much still to make for my living quarters.

JPG