I am not super great at interpersonal stuff. With the exception of a few traumas from my youth, I get past things pretty quickly and don’t dwell on stuff. And by extension, I don’t get attached to much (people or things).

I learned about the Sunk Cost Fallacy early in my life and I embraced the hell out of it and never let go. Which seems a tad ironic as I write it: I don’t easily form attachments because of my religious-like devotion to a core tenet of rational economic action. But I think my low-grade sociopathy makes me a better woodworker. I just don’t get attached to materials or projects because I will never let myself succumb to the sunk cost fallacy.

Late last year, I used a bunch of scraps to make a knock down workbench for woodworking away from my shop. Whether on the lawn or at my parents’ house in Vermont (which, I just realized, this morning, is a French portmanteau of “Green Mountain”), this bench has served me well. Except the slab top (face laminated Douglas Fir), which got wet in the back of the truck and cupped horribly.

So, embracing the sunk cost fallacy, rather than spending hours reflattening and whatnot, I scrapped the slab entirely (I’ll cut it up for firewood later). I had a lovely Poplar slab that is a perfect replacement and that only needed some minor attention before it was ready for the thickness planer. Sure, that poplar slab was technically for another project in the queue, but I need a workbench for outside now.

Also, I think it’s worth mentioning that the last slab was 78″ long. But making the poplar slab 76″ would leave an offcut large enough to get four table legs out of. So the new slab is 76″. That only leaves 11″ overhang on each end of the undercarriage. Oh well. Sunk Costs.

In the end, I think we could all be better at avoiding attachments. For instance, it would have been easy enough to try and blind peg the top to the existing 5/8 dowels in the undercarriage. But I took the time to saw off and plane down the old dowels and re-blind peg the top with larger dowels (3/4) that completely subsume the old dowel holes.

This post has gone a bit off the rails, admittedly. But I still need to mortise in the fixed deadman (seen on the floor above) and bore holdfast holes in the slab. And attach the Whipple Hook (which works great and is not being abandoned).

Because not all prior effort is actually a sunk cost.

JPG