For the last few weeks, in what little spare time I’ve had, I have agonized over one question: “What hand tools should a beginner woodworker buy first?” I tried (and hopefully succeeded) in answering that question over the last few “Bare Essentials” posts. In response to a question from a colleague, though, and for the TL;DR crowd out there, I thought I would take one more stab at it.
It’s a tough question and there is no easy answer, of course. Partly, because the answer depends on what kind of woodworking the beginner wants to do; partly, because each person’s budget and/or available space vary.
So, instead, I will answer an easier question: “If I had a time machine, what basic set of hand tools would I have bought my past self as a birthday present when I was a beginner hand tool woodworker?” I know it’s cheating, but, after all, the paradoxes largely resolve themselves and this is my website.
The picture above is for (literally) illustrative purposes only. I thought it would be fun to fit everything in a single camera frame, but I don’t actually own one of the tools I recommend (a No. 5 jack plane) and I apparently forgot to include three others in the picture (low angle block plane, 600 grit diamond stone, saw files).
I am sure my views will evolve over time, but for now, here is what I believe should have been the first tools I owned as a beginner hand tool woodworker (with the goal of making tables and chairs):
Safety: Eye protection (ALWAYS!)
Bench Chisels: 1/4″, 1/2″, 3/4″, 18 oz. mallet
Hand Planes: #5 jack, low angle block
Hand Saws: rip cut panel (8-10 TPI), rip cut tenon (8-12 TPI)
Marking and Measuring: 12 inch combination square (the best you can afford), 12 foot tape measure, double bevel marking knife, mechanical pencils
Sharpening: 600 grit diamond plate, 1200 grit diamond plate, eclipse-style honing guide, saw files
Other: spray lubricant, screwdrivers, deadblow mallet, 2x 12″ bar clamps, 2x 8″ bar clamps, 24″ straightedge, 50″ straightedge clamp, blue tape
These tools (plus a regular claw hammer, a power drill, wood glue and some sand paper) should give a new hand tool woodworker everything absolutely required to get started cutting joints and making things out of wood. Remember to stick to your budget and always do your safety, technique and sharpening research ahead of time.
I started out working on a WorkMate Portable Workbench, but any stout surface you can clamp material to (such as a sturdy dining table) is just fine. I recommend laying down some hardboard or plywood to protect any finished surfaces from tool marks and marring, though.
Note: if you are interested in brand recommendations for the above, please leave a comment or email me.